Xfold RTF Dual operator with connex, most dslr’s

SKU: N/A

$15,598.70

Compare

Description

Aircraft

Toray 3k Weave Carbon Fiber Frame
The main airframe is constructed from carbon fibre to take advantage of the material’s high strength-to-weight ratio. the 3k-width weave is the same weave commonly found on bicycle frames, as it is strong while still providing a degree of flexibility.

Gimbal Stabilizer and Video Downlink

3-Axis Gimbal for 3.7lb Camera
The included gimbal is compatible with a DSLR, mirrorless camera, or action camera weighing up to 3.7 pounds. The gimbal provides image stabilization while helping isolate the camera from vibration caused by the motors. Its three axes keep the camera horizontally and vertically level yet still allowing the camera to pan left and right.
Amimon CONNEX Wireless HD Video Link
Because of the CONNEX downlink, you can view a live, probably near-zero latency feed from the camera at up to 1080p60 resolution. Suitable for monitoring, FPV, and gimbal operation, the system features a range of up to 3300′ line-of-sight (depending on conditions). It incorporates an S.BUS relay, so that gimbal controls for S.BUS-compatible gimbals can be relayed to back to the aircraft, and can display OSD data from MAVLINK telemetry modules (telemetry system available separately). We have encrypted the video transmission to help prevent eavesdropping. The transmitter can link to up to four receivers, which allows, for example, the pilot and camera operator to each have their own monitor (two are included) or FPV goggles (not included).
FPV Camera with 5.8 GHz Video Downlink
In addition to CONNEX which provides the HD feed, an FPV camera and 5.8 GHz analogue video transmitter is included for the sake of the pilot or drone operator. You can view the feed on the included FPV monitors or a separately available set of FPV glasses.
7″ FPV Monitor with IPS Panel
It includes two 7″ field monitors, to monitor a live feed, either from the acquisition camera using the CONNEX system or from the FPV camera. Also, Each features a 1280 x 800 resolution panel with IPS technology to help improve the off-axis viewing angle. It has a 32-channel dual diversity receiver for receiving the signal from the 5.8 GHz downlink.

DJI Naza-M V2 Flight Controller with GPS

Supports DJI Ground Station
Therefore adding the separately available Bluetooth Datalink to the flight control system, you can plot waypoint-based autopilot courses using an iPad app or Windows software.
Software-Based Aircraft Stabilization
The system works with or without GPS and helps keep the aircraft stable and on course by taking data from gyros and other sensors and applying it to any pilot inputs. Naza-M V2 features GPS course correction plus GPS and compass interference monitoring, which combine to prevent the aircraft drifting off course due to magnetic interference that may throw off the compass (the GPS must be enabled and properly calibrated for this feature to work).
Takeoff Assistance
Also Helps ensure a stable, drift-free take off even on uneven surfaces.
Motor Failure Protection:
 When an octo-rotor equipped with a Naza-M V2 suffers a single motor failure in flight while in attitude or GPS mode, it will maintain its altitude and rotate around the stopped motor. As a result, it fly safely back to home and land.
Failsafe and Auto Go Home Support
If you disconnect the connection between the multi-rotor and the remote control (transmitter), during flight, a failsafe system will activate. Provided there was enough GPS signal at the time of the disconnection, the multi-rotor will fly back to its point of takeoff and land automatically. Lastly, you can use this feature manually using the One-Key Go-Home function activated using the Assistant software.

Specifications:

  • A turnkey drone designed for the dual operator and the DSLR user in mind, this is definitely a maximum manoeuvrability rig.
  • Includes: 2 radios, 3 axis gimbal, 2 travel case and lipo batteries.
  • Frame Construction: Toray 3K Weave Carbon Fiber
  • Weight: 3.9 Kg (incl motors, props, flight controller, landing gear)
  • Flight Controller: Naza V2 GPS, 2.4 BTU Ground Station with 50 waypoints (Pix4D Month)
  • Motors: xFold Custom 400 KV
  • ESC: xFold 30 Amp
  • Power: 10,000 mAh – 6S (min)
  • Battery Configuration: Dual Battery Standard
  • Radio: xFold/Futaba Commercial 14 Channel Center Sprung
  • Video Down Link: 700 mW VTX 5.8 GHz
  • Gimbal: 3 Axis GoPro Compatible
  • Flight Monitor: 7’’ super slim FPV Monitor built-in battery dual 32CH 5.8GHz diversity receivers
  • Batteries: 2 x 10,000 mAh (35c)
  • Telemetry: iOSD Mark 2
  • Travel Case: Hardshell Transport Cases
  • Finally, # of Batteries: 2

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “Xfold RTF Dual operator with connex, most dslr’s”

 

There are no reviews yet.